Short Message

INTRODUCTION

This document is used to configure the Short Message.

STEP 1: Create the Printer as like as below. 

Open

By clicking the Settings, enter the below inputs

Open

SAMPLE 1:

Url format: http://www.smsintegra.com/api/smsapi.aspx?uid=userid&pwd=password&mobile=@number&msg=@message&sid=DINEPLAN&type=0&dtTimeNow=xxxxx&entityid=1601997162755856988&tempid=1607100000000131470

Token char: The character used to define number & message. For the above, @ is used.

Live Mode: If it is on, then send the Message without the Pop up & the log. Else, show the Pop up & write the log.

SAMPLE 2:

Url format: https://sms.cell24x7.in/smsReceiver/sendSMS?user=userid&pwd=password&sender=DINEPLAN&mobile=#number&msg=#message&mt=0

Token char: The character used to define number & message. For the above, # is used.

Live Mode: If it is on, then send the Message without the Pop up & the log. Else, show the Pop up & write the log.

STEP 2: Create the Printer Template just for mapping.

STEP 3: Create the Printer Job as like as below.

HOW IT WORKS 

1. Go to Front Desk – Short Message.

2. Choose the Member or Customer in the Entity Type. (If need use the filter with needed data.)

3. Click Find.

4. Choose the Print Job (SMS).

5. In the Message, we can enter any text to send. But it should be the approved template in the SMS site.

6. Click Send.

Below is the response for SAMPLE 1

Below is the response for SAMPLE 2